Publicidad
Idiomas disponibles
Idiomas disponibles
TrOUBLESHOOTInG
Section 01
PIEZO-ELECTRIC IGNITION
TROUBLESHOOTING
SYMPTOMS
01. Burner will not ignite with piezo ignition system
If ignition does not occur in 5 seconds, turn the burner controls off, wait 5
minutes and repeat the lighting procedure.
If this does not work, to determine the cause, please try to ignite your griddle
with a match. (Please reference the Match Lighting Instructions in the
Cleaning the Burner Assembly section of the Care & Maintenance chapter.)
If you CAN ignite your griddle with a match
POSSIBLE CAUSES
01. Igniter wire misaligned.
02. Damage to the ignition system.
If you CAN NOT ignite your griddle with a match
POSSIBLE CAUSES
03. Burner tubes are not
receiving propane.
Troubleshooting | Owner's Manual | Model 1860
SOLUTION
Ensure that the igniter wire is posi-
tioned 1/8" to 1/4" away from the burner
tube, positioned above a burner hole.
Contact customer service for replace-
ment parts.
SOLUTION
Please reference the Gas Flow section of
the Troubleshooting Chapter.
23
Publicidad
