Publicidad
Idiomas disponibles
Idiomas disponibles
BURNER FL AME CHECK
Always check burner flame
before use.
S T E P 0 1
Light burners and rotate
knobs from high to low. When knob
is at high, flames should be larger
than when knob is at low.
S T E P 0 2
Perform burner flame
check by looking below griddle
top on the side of unit to view
burners below.
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
For additional support, see youtube.
com/blackstonegriddles
Care & Maintenance | Owner's Manual | Model 1860
MATCH LIGHTING
INSTRUCTIONS
Before beginning, check for gas
leaks. (Please reference the
Leak Test Instructions in the Fuel
chapter.)
S T E P 0 1
Ensure control knob is
in OFF position.
S T E P 0 2
Remove griddle top.
S T E P 0 3
Light a match (or long
lighter) no shorter than 11 inches
long. Place the flame on the right or
left side of the burner.
S T E P 0 4
Push in and turn the
control knob to the HIGH position.
Ensure burner lights and stays lit.
Healthy flames might have a few
flickers of yellow color ❶ , then a
dark blue color ❷ , followed by a
vibrant blue by the burner tube ❸ .
❶
❷
❸
19
Publicidad
