Publicidad
Idiomas disponibles
Idiomas disponibles
3
Multimeter Features
Start the event log mode
1 Select one of the modes stated in Table 3-2.
2 Press
Figure 3-8
3 Press
The maximum number of readings that can be stored for the event log is 2000
entries. When all entries are occupied,
pressed.
The event and interval log share the same memory buffer. Increased usage of the
event log entries will lead to the decrease of the maximum entries for the interval
log, and vice versa.
See Reviewing Previously Recorded Data (View) to review or erase the recorded
entries.
108
Log
for > 1 second to start the event log mode.
Hold
and the log entry number are displayed at the top of the display. The
display will return to normal after a short while (≈ 1 second) but with
being displayed. Press
multimeter's memory every time the trigger condition specified in Table 3-2 is
satisfied.
Event log display
Log
for > 1 second to exit the event log mode.
Hold
Log
to record subsequent readings into the
Hold
will be shown when
Keysight U1241C/U1242C User's Guide
Log
is
Hold
Publicidad
