Sea-Bird Scientific SBE 25plus Sealogger CTD Manual Del Usuario Básico página 6

Figure 2 Data I/O cable
Figure 3 SBE 4 to CTD cable
Notes:
• The Y cable from J7 connects to the pump and a data I/O power cable, so the system can connect
to a PC for setup and to transmit data, and to externally power the 25plus.
• Auxiliary sensors that draw more than 1 amp, even momentarily, must be connected to
J3 or J6. Refer to integration of high current-draw sensors for details.
2.1.2 Dimensions
6 English