HURAKAN HKN-BQ58P Manual De Instrucciones página 19

•
Do not place the equipment in the highly dust-laden areas.
•
The equipment installation place shall be kept tidy.
4.2 Connection to the power mains
•
Make sure that the local electric main parameters (current, voltage, frequency) meet
the equipment specifications.
•
Plug the power cable into the socket and make sure the system is properly grounded.
Description of the control panel buttons functionality.
Attention: control panels of various models and versions may differ! Follow the general equip-
ment operation instructions.
Control Panel 1.
After connecting to the power mains and turning on the switch under the panel, the freezer is
ready for operation.
1．AUTO Button
The equipment shall be turned on after the AUTO button is pressed: cooling mode is activated,
the mix, prepared and loaded into the freezer, starts mixing and cooling.
2．WASH Button
When WASH button is pressed, the equipment switches to the washing mode. For this purpose,
1.5-2 liters of warm water shall be loaded into each hopper. After washing and draining water
via the outlet tap, make sure the equipment is properly cleaned. Repeat the procedure if nec-
essary.
Attention: prior to cleaning, the freezer shall be left for a while under the ambient temperature
and warm up, to make the cleaning more effective.
3．STOP Button.
When STOP button is pressed, all current operations shall be cancelled, and the freezer shall
switch to the standby mode.
All manuals and user guides at all-guides.com
EN
19