Publicidad
Idiomas disponibles
Idiomas disponibles
3.3. Working with the unit
1.
Place the water container on the stand. Fill the container with hot water (the
amount of water poured should be within the MIN/MAX range marked on the
container.
2.
Place the GN container filled with food in the container with water. When using
GN ½ and GN ¼ containers, use the support that should be placed on the
container with water. Close the cover.
3.
Place the can of food warmer fuel in the containers provided. Light the fuel,
place the fuel containers on the shelf located under the water container.
Adjust the size of the flame by sliding the lid of the fuel container.
4.
After removing the lid from the heater, the user can hang it in two ways shown
in the figure below, i.e. hang it with the handle on the side of the water
container or place it on the hooks.
Model: RCCD-RT16_9L
Publicidad
