Personal Safety; Noise Information - Bosch GLL 150 E LR 3 Instrucciones De Funcionamiento

Replace all old batteries at the same time
with new batteries of the same brand and
type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per
local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a tool.
Do not use a tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating a tool may result in serious personal
injury or incorrect measurement results.
Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
DO NOT use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the laser
beam, but they do not protect against laser
radiation.
DO NOT use the laser viewing glasses as
sun glasses or in traffic. The laser viewing
glasses do not afford complete UV protection
and reduce color perception.
DO NOT use any optical tools such as, but
not limited to, telescopes or transits to view
the laser beam. Serious eye injury could result.
DO NOT stare directly at the laser beam or
project the laser beam directly into the eyes
of others. Serious eye injury could result.
Use caution when using measuring tools in
the vicinity of electrical hazards.
Magnets
Keep the tool and laser
target away from cardiac
pacemakers. The magnets of
the tool and laser target plate
generate a field that can impair
the function of cardiac
pacemakers.
Keep the tool and laser target away from
magnetic data medium and magnetically-
sensitive equipment.
The effect of the magnets of the tool and laser
target plate can lead to irreversible data loss.
Noise Information
Do not hold the measuring tool close to
your ear! Do not hold the measuring tool
closer than 1 meter from your ear when
using loud volume! The A-weighted sound
pressure level of the audio signal at one meter
distance is 75-85dB(A). Serious injury could
result.
Use and care
Use the correct tool for your application. The
correct tool will do the job better and safer.
Do not use the tool if the switch does not
turn it on and off. Any tool that cannot be
controlled with the switch is dangerous and
must be repaired.
Store idle tool out of the reach of children
and do not allow persons unfamiliar with the
tool or these instructions to operate the tool.
Tools are dangerous in the hands of untrained
users.
Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect the
operation. If damaged, repair tool before
use. Many accidents are caused by poorly
maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions and in
the manner intended for the particular type
of tool, taking into account the working
conditions and the work to be performed.
Use of the tool for operations different from
those intended could result in a hazardous
situation.
Have your tool serviced by a qualified repair
person using only identical replacement
parts. This will ensure that the safety of the tool
is maintained.
Develop a periodic maintenance schedule
for tool.
Follow checking recalibration procedures
outlined in this instruction manual.
When cleaning a tool be careful not to
disassemble any portion of the tool since
internal wires may be misplaced or pinched
or may be improperly mounted. Certain
cleaning agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage
plastic parts. agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage
plastic parts.
SAVE THESE INSTRUCTIONS.
-6-
Service