Viatom Checkme Lite PD-30092 Manual Del Usuario página 8

Measuring without cable
To start an ECG Recorder measurement without cable,
1. If the device is power off, press the Home button.
2. In the Main Screen, tap the <ECG Recorder> icon.
3. Choose the method A or B.
4. Follow the instruction according to the mode you
selected.
Press the right thumb on the right electrode;

Press the right forefinger on the back electrode;

For Lead I, press the left electrode to the left palm;

For Lead II, press the left electrode to the left

lowe abdomen;
Do not press the device too firmly against your skin, which may result in
EMG ( electromyography ) interference. After you finish the above steps, hold the
device stably and staycalm.
5. Once the device detects stable waveform, it will automatically start the
measurement. The countdown bar moves from left to right.
6. When the bar if fully filled, the device will analysis your data, and then show
the measurement result.
Measuring with Cable
To start an ECG Recorder measurement with cable,
1. If the device is power off, press the Home button.
2. In the Main Screen, tap the <ECG Recorder> icon.
3. Choose the method C or D.
4. Follow the instructions to connect the ECG cable and place the ECG electrodes.
Sit down or stand, stay calm;

7