MSW Motor Technics MSW-ES-700 Manual De Instrucciones página 31

MSW-ES-700M
Fill the container with the appropriate paint/paint and screw it back to the gun.
Adjust the power and angle of the nozzle.
MSW-ES-1000
Fill the container with the appropriate paint/paint and screw it back to the gun.
Connect the air hose between the pump and the gun. Set the required amount of
sprayed material with the adjusting screw - by turning it clockwise the amount
decreases, and by turning it counterclockwise the amount increases. Adjust the
nozzle angle position according to the desired spray pattern (see image below).
Before painting/varnishing, press the power switch until it lights up.
3.3.
Working with the device
3.3.1 Proper paint viscosity
Keep in mind that this is a multi-purpose device, i.e. you can apply
dispersion paints (acrylic, latex), oil paints, as well as stains,
varnishes, lacquers, stain varnish, impregnates, etc., so to achieve
the best possible result, consider the paint viscosity before
application.
Some paints require dilution. For this purpose, using the supplied
special funnel - viscosity meter - is recommended.
The time needed for the paint to flow completely from the viscosity