Adjusting The Shock Absorber; Condition Of The Brake Discs - DEFYGRAVITY SHERCO TY125 Manual De Propietario

Adjusting the shock absorber

A

Condition of the brake discs

60 60
Maintenance processes
Spring compression:
The ring is used to adjust and set the position in
order to change the preload on the spring.
Turn to the right for:
Turn to the left for:
The wear on the thickness of the discs is produced
in the area of contact between the disc and the
brake pads.
Avoid riding the machine if the wearing area is not
greater than 2.7 mm.
- Toothed and threaded ring
MORE PRESSURE.
LESS PRESSURE.
ATTENTION
.
A