Removing And Reinstalling Front Wheel - DEFYGRAVITY SHERCO TY125 Manual De Propietario

Removing and reinstalling front wheel

B
Place the motorcycle in an upright position and
immobilise it at the rear.
To remove the front wheel:
- Remove the bolt
A
Remove the wheel shaft
-
To refit the front wheel:
- Proceed in reverse order to the removal.
During the process do not press the brake lever. If
the lever has been pressed, the callipers will have
to be pushed back to make them re-separate.
If necessary, refill with brake fluid and bleed the
corresponding circuit.
Take care when inserting the wheel to ensure that the
disc is not damaged by the brake pads.
Once everything is fitted, check the correct brake
operation before riding the machine.
WARNING
from the right fork.
A
TIP
WARNING
.
B
63 63