Heat setting
1 - 2
3 - 4
5
6 - 9
7.2 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates,
be used. All other symbols on the control
panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press
The heat setting is lowered to 1.
2. To deactivate the function: press
The previous heat setting comes on.
7.3 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
Set the heat setting first.
To activate the function: press
To deactivate the function: press
The function deactivates as you
deactivate the hob.
7.4 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: press
set any heat setting. Press and hold
seconds, until the indicator above the symbol
appears. Deactivate the hob with
80
ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hours
and
can
.
.
.
again.
. Do not
for 3
.
The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press
not set any heat setting. Press and hold
for 3 seconds, until the indicator above the
symbol disappears. Deactivate the hob with
.
Cooking with the function activated: press
, then press
for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with
the function operates again.
7.5 Bridge
The function operates when the pot
covers the centres of the two zones. For
more information on the correct
placement of cookware refer to "Using
the cooking zones".
This function connects two cooking zones
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the left /
right control sensors.
To deactivate the function: touch
The cooking zones operate independently.
7.6 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
. Do
/
. To set or
/
.