Página 1
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays) The stories of your life. Bookcase With Doors NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Nova Loft Collection | Model 425510 PLEASE READ AND KEEP FOR FUTURE REFERENCE. Sauder.com English pg 1-14 Français pg 15-17 Español pg 18-20...
Página 2
Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-14 Electric drill with 1/8" bit (ONLY in indicated step) Français 15-17 Español 18-20 Safety 21-22 Warranty Page 2 www.sauder.com/service 425510...
Página 3
TOP (1) LARGE BACK (2) RIGHT END (1) FIXED SHELF (4) BACK MOLDING (2) LEFT FRAME (1) ADJUSTABLE SHELF (1) LEFT DOOR (1) RIGHT FRAME (1) RIGHT DOOR (1) CONNECTOR (4) MOLDING (6) SMALL BACK (2) 425510 www.sauder.com/service Page 3...
Página 4
FURNITURE TIPPING RESTRAINT KIT - 1 SMALL BLACK 5/8" FLAT HEAD SCREW - 16 LARGE BLACK 5/8" FLAT HEAD SCREW - 24 BLACK 3/8" PAN HEAD SCREW - 32 BLACK 7/8" MACHINE SCREW - 4 BLACK 3/8" MACHINE SCREW - 28 Page 4 www.sauder.com/service 425510...
Página 5
Fasten four CONNECTORS (O) to the ENDS (A and B). å Use four BLACK 3/8" MACHINE SCREWS (10). Fasten the FRAMES (C and D) to the CONNECTORS (O). å Use four BLACK 3/8" MACHINE SCREWS (10). BLACK 3/8" MACHINE SCREW (8 used in this step) 425510 www.sauder.com/service Page 5...
Página 6
Use eight BLACK 3/8" MACHINE SCREWS (10). The tabs should face each other and be closer to the top of the unit. Top of your unit These holes must be here. BLACK 3/8" MACHINE SCREW (8 used in this step) Page 6 www.sauder.com/service 425510...
Página 7
BLACK 3/8" MACHINE SCREW (8 used in this step) Top of your unit These holes must be here. The tabs should face each other and be closer to the top of the unit. 425510 www.sauder.com/service Page 7...
Página 8
Step 4 Fasten the TOP (F) to the FRAMES (C and D). Use four å BLACK 3/8" MACHINE SCREWS (10). BLACK 3/8" MACHINE SCREW (4 used in this step) Page 8 www.sauder.com/service 425510...
Página 9
Step 5 Fasten the FIXED SHELVES (G) to the MOLDINGS (E and M). å Use sixteen SMALL BLACK 5/8" FLAT HEAD SCREWS (6). SMALL BLACK 5/8" FLAT HEAD SCREW (16 used in this step) 425510 www.sauder.com/service Page 9...
Página 10
Fasten sixteen METAL BRACKETS (1) to the BACKS (K and L). å Use sixteen BLACK 3/8" PAN HEAD SCREWS (8). Now might be a good time to refresh your drink. BLACK 3/8" PAN HEAD SCREW (16 used in this step) Page 10 www.sauder.com/service 425510...
Página 11
SAFETY STRAP to the TOP (F). Use the provided short screw. BLACK 3/8" PAN HEAD SCREW (16 used in this step) Use the short screw through the hole in the strap and into the top surface of the TOP (F). 425510 www.sauder.com/service Page 11...
Página 12
Fasten two PULLS (5) to the DOORS (J and N). Use four å leave without a bite. BLACK 7/8" MACHINE SCREWS (9). LARGE BLACK 5/8" FLAT HEAD SCREW (8 used in this step) (4 used) BLACK 7/8" MACHINE SCREW (4 used in this step) Page 12 www.sauder.com/service 425510...
Página 13
Fasten two BUMPERS to the DOORS (J and N) to where they come in contact with the FIXED SHELF (G). å Drill this hole into a stud in your wall. Electric drill with 1/8" bit (ONLY in indicated step) LARGE BLACK 5/8" FLAT HEAD SCREW (16 used in this step) 425510 www.sauder.com/service Page 13...
Página 14
NOTE: Please read the back pages of the instruction booklet for important å safety information. This completes assembly. Clean with a damp cloth. Wipe dry. å And to celebrate, why not share your success story at sauder.com or (4 used) Page 14 www.sauder.com/service 425510...
Página 15
Modèle 425510 Bibliothèque avec portes Utilisez les instructions d’ a ssemblage en français avec les NOUS CONTACTER EN PREMIER schémas étape par étape du manuel d’instruction en anglais. AVANT D'EFFECTUER TOUT RETOUR AU MAGASIN. Chaque étape en français correspond à la même étape en Nous faisons de notre mieux pour nous assurer que votre meuble anglais.
Página 16
GAUCHE (A) et au CADRE GAUCHE (C). Utiliser huit VIS À MÉTAUX 9,5 mm NOIRES (10). ÉTAPE 3 Fixer l'EXTRÉMITÉ DROITE (B) et le CADRE DROIT (D) aux MOULURES (E et M). Utiliser huit VIS À MÉTAUX 9,5 mm NOIRES (10). Page 16 www.sauder.com/service 425510...
Página 17
VIS À MÉTAUX 22 mm NOIRES (9). REMARQUE : Prière de lire les informations importantes sur la sécurité fi gurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. 425510 www.sauder.com/service Page 17...
Página 18
EXTREMO IZQUIERDO ..........1 SOPORTE DE METAL ........... 16 su referencia futura. Si necesita ponerse en EXTREMO DERECHO ..........1 ESPIGA DE ESTANTE ..........4 contacto con Sauder en MARCO IZQUIERDO ..........1 TOPE ..................2 cuanto a esta unidad, MARCO DERECHO ............1 BISAGRA ................4 refi...
Página 19
TORNILLOS NEGROS PARA METAL de 9,5 mm (10). PASO 3 Fije el EXTREMO DERECHO (B) y el MARCO DERECHO (D) a las MOLDURAS (E y M). Utilice ocho TORNILLOS NEGROS PARA METAL de 9,5 mm (10). 425510 www.sauder.com/service Page 19...
Página 20
NOTA: Por favor, lea las páginas de atrás del folleto de TORNILLOS NEGROS PARA METAL de 22 mm (9). instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Page 20 www.sauder.com/service 425510...
Página 21
Les téléviseurs peuvent être un téléviseur. cet eff et. particulièrement lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 425510 www.sauder.com/service Page 21...
Página 22
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 22 www.sauder.com/service 425510...
Página 23
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Página 24
BEFORE MAKING ANY RETURNS TO THE RETAILER. Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.