Publicidad
Idiomas disponibles
Idiomas disponibles
manuals and user guides at all-guides.c
1.1. PRELIMINARY
This apparatus has been
designed for illuminance
measuring using.
Check if the battery is
installed correctly.
There is a switch inside
this luxmeter for the user
to select the full range
output level between 2V
and 0.2V. Please refer to
graph to locate the switch
ant to Chapter 5 for how
to open the luxmeter.
In this manual every output voltage is
referred to 2V full range output level. If
0.2V full range output level is chosen,
please consider every output voltage
value divided by 10.
1.2. DURING USE
Read the recommendation which follow
and instruction in this manual:
Use the probe only in the ranges
indicated in this manual.
1.3. AFTER USE
Once
completed, switch off the probe.
If the probe is not be used for a long
period, remove the battery.
WARNING
No
compliance
warnings
instructions
damage the apparatus and/or
its component.
the
Release EN 1.01 – 19/04/2002
with
and/or
for
use
measurements
EN - 3
HT53 HT53/05
2 V
Output Voltage
Select Switch
0.2V
9 V
BATTERY
the
the
may
are
Publicidad
