Publicidad
Idiomas disponibles
Idiomas disponibles
manuals and user guides at all-guides.c
2. PRODUCT DESCRIPTION
The luxmeter probes are illuminance to
voltage converters. The probes are
battery operated and designed to provide
a
connected to any high impedance digital
multimeter (DMM) that accepts shrouded
banana plugs (HT53) and Hypertac
connector (HT53/05) and has 1mV DC
resolution and at least 2000mV DC full
scale readout capability.
The Luxmeter probe provides a fast and
convenient way to measure illuminance in
normal ambient conditions. It is ideal for
spot surveying in any application where
illuminance measurements are important.
The output is 1mV DC per 0.01lux at
20lux range and 1mV DC per 1lux at
2000lux range and 1mV DC per 10lux at
20000lux range (selected with a switch).
3. PREPAPATION FOR USE
3.1. SUPPLY VOLTAGE
The probe is battery supplied; it uses a
single battery model 9V NEDA 1604, IEC
6F22, JIS 006P included in packaging.
The Battery autonomy is 220 hours.
To
instrument is shipped with battery outside
of the probe; to insert the battery please
follow the indicator of paragraph 5.3.
The "Low BATT" LED indicator light up,
when the battery is nearly discharged. In
case replace it following the instructions
in paragraph 5.3.
3.2. CALIBRATION
The
characteristics listed in this manual. The
performance
guaranteed for one year.
direct
Luxmeter
avoid
battery
instrument
Release EN 1.01 – 19/04/2002
discharging
fulfils
of
the
specification
EN - 4
HT53 HT53/05
reading
the
technical
when
the
is
Publicidad
