Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
TROUBLESHOOTING
Minor problems often can be xed without calling
customer service.
PROBLEM
Check power cord, plugs and outlet.
Motor does not run
Suction capacity
decreases
Thermal overload has been tripped:
1. Turn the vacuum off and
Vacuum stops
2. Empty the dust tank, if needed.
running
3. Allow the unit to cool.
4. Plug the power cord into an
Dust comes out
while vacuuming
SOLUTION
Ensure the on/off switch is in the
ON position( I ).
Remove blockages in the suction
nozzle, suction tube, suction hose
or lters.
Replace the paper or eece dust bag.
Check for proper installation of the
lters.
Clean or replace the lters.
Empty the dust tank, refer to Empty
the tank under Operating
instructions.
disconnect vacuum cleaner from
power source.
appropriate outlet and turn on/off
switch to the ON position( I )to
test. If vacuum will not restart
call 1-888-899-0146
Check for proper installation of the
lters.
Ensure lters are not damaged;
replace if necessary.
Ensure lter seals are in place and
are secure.
6
Publicidad
