Descargar Imprimir esta página

Num'axes PIE1051 Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
Multi shot
Video resolution
Video length
Cam
PIR
PIR Switch
PIR Sensitivity
PIR Interval
Time Lapse
Working timer No 1
Set
OK
PIR
Settings
PIR switch
PIR sensor detection
sensitivity
PIR interval
PIE1051 - Indice D – Mars 2022
− Minimum blur: this setting offers a shorter exposure time to minimize
motion blur for a better image quality (shortened infrared flash range).
− Balanced: this setting offers a combination of the above 2 options.
NUM'AXES SIM card
Deactivated parameter | 1 photo per trigger
Other SIM card
1 photo | 2 photos | 3 photos | 4 photos | 5 photos
Programmable from 1 up to 5 photos per trigger
FULL HD – 1080P | HD – 720P | WVGA
Higher resolution produces better quality videos but creates larger files that
take up more of the memory card capacity (fills up faster).
Default setting: 10 seconds | Programmable from 05 to 59 seconds
4G
Other
ON
ON
OFF
OFF
Exit
MENU
Programmable options (default settings in bold characters)
OFF | ON
With the PIR switch ON, the PIR sensor is turned on and the camera is able to
take photos/videos per motion activation even when the Time-lapse setting
is set to ON.
With the PIR switch OFF, the PIR sensor is turned off and the camera is not
able to take photos/videos per motion activation.
High | Medium | Low
With a high detection sensitivity, the PIR sensor:
‒ is more sensitive to movements by smaller subjects;
‒ offers longer detection distance;
‒ can trigger the camera more easily.
In high temperature environment, it is recommended to use high detection
sensitivity. This setting makes it easier for the PIR sensor to detect a difference
between body heat and outdoor temperature.
In environments with lots of interference (hot wind, smoke, near window), it
is recommended to use low PIR detection sensitivity.
OFF | ON – Default PIR interval: 20 seconds
Select "ON" then press OK to set the time interval that you desire between
photos/videos upon motion. This option avoids camera taking to many photos
or videos.
Cam
PIR
Working timer No 2
Set
OK
4G
Other
OFF
Exit
MENU
25/104

Publicidad

loading