Publicidad
Idiomas disponibles
Idiomas disponibles
Cam
PIR
Language
Date/Time
Date Type
Time Stamp
Battery type
Set
OK
Cam
PIR
Product information
Set
OK
PIE1051 - Indice D – Mars 2022
− During the signal search in SETUP mode, the camera will check if the
inserted SIM card is activated.
− After the signal search, the message "Pls input PIN-Code" will appear
on the LCD screen if your SIM card is not activated (the message will
not appear if your SIM card is already activated).
− The "SIM PIN" setting will become configurable in the "4G" page of the
menu.
− Enter the PIN code of your SIM card in the "SIM PIN" setting. The
camera will automatically power off. When you will restart it, the
camera will activate the SIM card automatically during the signal
search.
NOTE:
− The message "Pls input PIN-Code" will pop up again if the wrong PIN
code is entered.
− Please re-try your PIN code if you see the message "Pls input PIN-Code"
again after the signal search.
− A SIM card is normally limited to be activated 3 times; it will be locked
if the PIN codes entered are all wrong during these 3 attempts. So we
suggest you to double confirm your PIN code before you try again.
− Please insert the SIM card into your phone to unlock it by using its PUK
code after 3 unsuccessful activation attempts.
4G
Other
En
Au
EU
ON
ALK
Exit
MENU
4G
Other
Exit
MENU
Cam
PIR
Frequency
Cycle recording
Password
Reset
Update
Set
OK
4G
Other
50Hz
ON
OFF
Exit
MENU
30/104
Publicidad
