Makita ML010G Manual De Instrucciones página 9

Self-righting design
The appliance can recover from the tilted position if the
angle is 80 degrees or smaller from the perpendicular
position. The standing angle of the appliance varies
depending on the conditions of the ground and the
power supply to be used.
80°
Fig.8
Hole for padlock
For anti-theft of battery cartridges, hole for padlock is provided.
1
Fig.9
► 1. Hole for padlock
OPERATION
CAUTION:
commercial use. Do not use the appliance for
household purpose.
Turning on / off the appliance
Press the power switch button to turn on the appliance.
Press the power switch button again to turn off the
80°
appliance.
Fig.10
► 1. Power switch button
NOTE: The appliance turns on at the same mode as
the last setting.
Changing brightness
Press the brightness change button while the appliance
is operating. The brightness decreases every time you
press the brightness change button. The brightness
will return to the highest when operating in the lowest
brightness.
Fig.11
► 1. Brightness change button
9 ENGLISH
This appliance is intended for
1
1