Makita GA042G Manual De Instrucciones página 24

COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
• Use of dust collecting wheel guards for cutting-off operations in concrete or masonry reduces a risk
of exposure to dust.
► Fig.39
-
1
2
3
4
5
6
7
8
9
10
NOTE: *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *2 Clip-on cutting wheel guard attachment is not available in some countries such as Korea, Taiwan, and
mainland China. For more details, refer to the instruction of the clip-on cutting wheel guard attachment.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
• Accessories listed in "COMBINATION OF
APPLICATIONS AND ACCESSORIES"
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Application 100 mm (4") model
-
-
Grinding / Sanding
-
Cutting-off
Wire brushing
Wire brushing
-
-
Cutting-off
115 mm (4-1/2") model
Side grip
Wheel Guard (for grinding wheel)
Depressed center wheel / Flap disc
Wheel Guard (for cut-off wheel) *1
Abrasive cut-off wheel / Diamond wheel
-
Wire cup brush
Clip-on cutting wheel guard attachment *2
Dust collecting wheel guard for cutting-off
Diamond wheel
24 ENGLISH
125 mm (5") model
Wire wheel brush