Publicidad
Idiomas disponibles
Idiomas disponibles
intended; for example do not use circular
saws to cut tree limbs or long.
31. Drees appropriately
-
Do not wear loose clothing or jewelry,
which can be caught in moving parts
-
Suitable
safety
recommended
outdoors
-
Wear protective covering to contain
long hair
32. Use protective equipment1
-
Use safety glasses
-
Use face or dust mask if working
operations create dust
WARNING: Not using protective equipment
or appropriate clothing can cause personal
injury or increase the severity of an injury.
33. Connect dust extraction equipment. If
the tool is provided for the connection of
dust
extraction
equipment, ensure these are connected
and properly used.
34. Do not abuse the power cable – Never
yank the power cable to disconnect if
from the socket. Keep the power cable
away from heat, oil and sharp edges.
Damaged or entangled power cables
increase the risk of electric shock
35. Secure work – When possible use
clamps or a vice to hold the work- if is
safe than using your hand
36. Do not overreach – Keep proper
footing and balance at all time
37. Maintain tools with care
-
Keep cutting tools sharp and clean
makes the tool easier to control and
less likely to bind or lock in the
workpiece
-
Follow instruction for lubricating and
changing accessories
-
Inspect
tool
periodically and if damaged have
them repaired by an authorized
service facility
-
Inspect extension cables periodically
and replace if damaged
-
Keep handles dry, clean and free
from oil and grease
WARKING:
Many
caused by poorly maintained power
tools.
38. Disconnect tools – When not use,
before servicing and when changing
accessories such as blades, bits and
footwear
is
when
working
and
collecting
power
cables
accidents
are
cutters, disconnect tools from the power
supply
WARNING: The use of accessories or
attachments not recommended by the
manufacturer may result in a risk of injury to
persons.
39. Remove
adjusting
wrenches – Form the habit of checking
to see that keys and adjusting wrenches
are removed from the tool before
switching it on
40. Avoid unintentional starting – Ensure
switch
is
in
connecting to a mains socket or
inserting a battery pack, or when picking
up or carrying the tool
WARNING: Unintended starting of a tool can
cause major injuries
41. Use outdoor extension leads – When
the tool is used outdoors, use only
extension cords intended for outdoor
use and so marked. Use of an extension
cable suitable for outdoor use reduces
the risk of electric shock
42. Stay alert
-
Watch what you are doing, use
common sense and do not operate
the tool when you are tired
-
Do not use a power tool while you,
are under the influence of drugs,
alcohol or medication
WARNING: A moment of inattention while
operating power tools may result in serious
personal injury.
43. Check damaged parts
-
Before further use of tool, it should be
carefully checked to determine that it
will operate properly and perform its
intended function
-
Check for alignment of moving parts,
biding of moving parts, breakage of
parts, mounting and any other
conditions
that
operation
-
A guard or other part that is
damaged
should
repaired
or
authorized service center unless
otherwise indicated in this instruction
manual
-
Have defective switches replaced by
an authorized service center
WARNING: Do not use the tool if the on/off
switch does not turn it on and off. The switch
must be repaired before the tool is used.
keys
and
"off"
position
when
may
affect
its
be
properly
replaced
by
an
Publicidad
