Publicidad
Idiomas disponibles
Idiomas disponibles
damping
materials
workpiece from "ringing"
•
Use hearing protection in accordance
with employer´s instructions and as
required by occupational health and
safety regulations
•
Operate and maintain this tool as
recommended
in
handbook, to prevent an unnecessary
increase in the noise level
•
Select, maintain and replace the
consumable/inserted
recommended
in
handbook, to prevent an unnecessary
increase in noise
•
If the tool has a silencer, always
ensure it is in place and in good
working order when the tool is being
operated
Vibration Hazards
•
This information shall draw attention
to vibration hazards that have not
been
eliminated by
construction and remain as residual
vibration
risks.
employers
to
circumstances in which the operator is
likely to be at risk from vibration
exposure. If the vibration-emission
value obtained using ISO 28927-3
does not adequately represent the
vibration emission in the intended
uses (and foreseeable misuses) of the
machine,
additional
and/or warnings shall be supplied to
enable this risks arising from vibration
to be assessed and managed
•
Exposure to vibration can cause
disabling damage to the nerves and
blood supply of the hands and arms
•
Wear warm clothing when working in
cold conditions and keep your hands
warm and dry
•
If you experience numbness, tingling,
pain or whitening of the skin in you
fingers or hands, stop using the
machine, inform your employer and
consult a physician
•
Operate and maintain the sander or
polisher as recommended in the
instruction handbook, to prevent an
unnecessary increase in vibration
levels
•
Hold the tool with a light but safe grip,
taking account of the required hand
to
prevent
the
instruction
tool
as
the
instruction
design
and
It
shall
enable
identify
the
information
reaction forces, because the risk from
vibration is generally greater when the
grip force is higher
Air Compressor Safety
When using machinery there are certain
precautions that need to be taken in order
to promote safe operation. Always apply
caution and respect to the machinery in
use; if the following safety precautions are
ignored then damage or harm may be
subjected to the operator, property or
bystander. It is in the interest of the user
to read and pay attention to the following
guidelines.
WARNING: This air compressor does not
produce
breathable
compressed air is dangerous and can
cause harm
WARNING: Hot surfaces are present. DO
NOT touch the motor, cylinder, heads and
tubes as harm may occur from burning.
WARNING: DO NOT use in potentially
explosive atmospheres. Ensure that the
atmosphere is free from combustible
gases and high concentrations of fine dust
t)
NEVER use compressed air for an
unintended use. Compressed air
has the potential to cause harm.
Avoid
directing
towards animals or persons, and
NEVER release compressed air
toward the skin.
u) Ensure the work area is debris-
free and dry. Untidy workspaces
raise the potential for injury
v) Compressor should be assembled
correctly. Using a compressor with
guards, covers and components
removed is dangerous and may
compromise this compressor´s ability
to perform.
w) DO NOT modify the compressor.
Modifications to the compressor can
be
dangerous.
modifications may not only hinder the
compressor´s ability to perform, but
may result in harm being caused to
the operator. Repairs should be
carried out by qualified personnel
only,
using
only
verified components.
x) Safety
valves
modified or tampered with. Doing
so can cause harm to the operator
and damage the air compressor. The
maximum pressure is predetermined
air.
Ingesting
compressed
air
Unapproved
manufacturer
should
not
be
Publicidad
