by the manufacturer and should not
be adjusted.
y) Keep bystanders away. Children
and bystanders should be kept away
from the compressor. Unintentional
interaction with the compressor is
dangerous.
z) Do not abuse cables and hoses.
Keep cables and hoses from heat,
fluids and sharp edges, NEVER
attempt to strain the cables and
hoses
further
extended reach, or allow them to
become tangled
aa) The air compressor should be
stored
correctly
depressurized. During storage and
transportation
should
be
free
ALWAYS expect the air from the air
compressor after use
bb) Ensure that the pressure rating is
compliant with the tool. ALWAYS
check the air tool has a safety
working pressure that exceeds the
working pressure of the machine
cc) Use appropriate protections for
the task at hand. Suitable protection
for the application; face masks will
protect
from
spray
goggles will protect from flying
debris.
dd) Operate
the
correctly. Adhere to the operation
instructions provided in the manual
NEVER allow children or persons
unfamiliar with the operation of the air
compressor use this product
ee) Disconnect accessories with case.
Depressurize the tank and ensure
that the air supply is turned off prior
to removing accessories and air
tools.
ff) Wear appropriate clothing. Loose
hanging clothing, jewelry or long hair
can be caught in moving parts
than
their
fully
and
the
compressor
from
pressure,
paints
and
air
compressor
gg) Keep the air compressor dry and
free from moisture. Condensation
can become trapped within the
system. A specified release valve will
remove
moisture
compressor.
hh) Ensure
the
compliant with local rules and
regulations. Regular testing will
determine
whether
compressor is suitable for service in
certain regions.
ii) Ensure
lubrication
within
specification
applicable).
Operating
compressor
without
lubrication will affect the longevity of
the components.
jj) Take the correct precautions when
performing maintenance. Ensure
ALL compressed air is expelled from
the air compressor tank and power
supply
is
disconnected
commencing
any
procedures.
kk) Operate air compressor within an
appropriate environment. DO NOT
use in ambient temperatures below
0ºC, wet, or damp conditions. ONLY
indoor use is permitted for air
compressor operation.
ll) Freezing of condensation within
the
system
components and create potential
for harm to the operator. This may
be prevented by operating the air
compressor
in
temperatures, and by frequently
expelling condensation from the
system.
from
the
air
compressor
is
the
air
levels
are
(where
the
air
sufficient
before
maintenance
can
damage
suitable
ambient