Royal Catering RCFW-20-PRO Manual De Instrucciones página 21

electrical and electronic devices. This is shown by the symbol placed on the
product, operating manual or the packaging. The materials used in the device can
be reused according to their intended use. By reusing materials or conducting
other forms of using used devices, you make a significant contribution to the
protection of our environment.
Local administration will provide you with information about the appropriate
point for disposal of used devices.
TROUBLESHOOTING
Problem
The device does not
turn on after the
"ON" button
pressed.
Device is working
improperly or it is
overheating
Possible cause
1. Check the connection of
the power supply cable to
is the socket
2. Power outage
3. Presence
material in the grinding
mechanism
1. Voltage in the power
supply socket too low
2. Machine is overloaded
Action
1. Connect the power supply
cable to the power socket
2. Check fuses
3.
of foreign material
1. Check the level of voltage
in the power supply sockets
2. Clean the products of
tendons, cartilage and cut
large product pieces into
smaller portions
Remove the foreign