Publicidad
Idiomas disponibles
Idiomas disponibles
EN
AVVIAMENTO E REGOLAZIONE
5
START-UP AND CALIBRATION
TARATURE INDICATIVE
TARATURE INDICATIVE SIME FUEL 25 LN (
5.1
Table of advisable calibrations
- UGELLO DANFOSS CEN H GPH 0.5X45°
5.1.1
Table of advisable calibrations sime fuel 25 ln (vers.He) cod. 8099124
- PRESSIONE POMPA (bar): 12.5
– NOZZLE DANFOSS CEN H GPH 0.55X45°
- SERRANDA ARIA (N°TACCHE): 2.5
– PUMP PRESSURE (bar): 12.5
- REGOLAZIONE TESTA (N°TACCHE): 5
– AIR SHUTTER (N°NOTCHES): 2.5
– HEAD ADUSTMENT (N°NOTCHES): 6
TARATURE INDICATIVE SIME FUEL 35 LN (
- UGELLO DANFOSS CEN H GPH 0.65X45°
5.1.2
Table of advisable calibrations sime fuel 35 ln (vers.He) cod. 8099125
- PRESSIONE POMPA (bar): 12.5
– NOZZLE DANFOSS CEN H GPH 0.65X45°
- SERRANDA ARIA (N°TACCHE): 5
– PUMP PRESSURE (bar): 12.5
– AIR SHUTTER (N°NOTCHES): 5
- REGOLAZIONE TESTA (N°TACCHE): 8
– HEAD ADJUSTMENT (N°NOTCHES): 8
TARATURE INDICATIVE SIME FUEL 25 LN (
5.1.3
Table of advisable calibrations sime fuel 25 ln (vers.Std) cod. 8099172
- UGELLO DANFOSS CEN H GPH 0.6X45°
– NOZZLE DANFOSS CEN H GPH 0.6X45°
- PRESSIONE POMPA (bar): 12
– PUMP PRESSURE (bar): 11
- SERRANDA ARIA (N°TACCHE): 3.5
– AIR SHUTTER (N°NOTCHES): 4.5
– HEAD ADJUSTMENT (N°NOTCHES): 5
- REGOLAZIONE TESTA (N°TACCHE): 5
5.1.4
Table of advisable calibrations sime fuel 35 ln (vers.Std) cod. 8099173
TARATURE INDICATIVE SIME FUEL 35 LN (
– NOZZLE DANFOSS CEN H GPH 0.65X45°
- UGELLO DANFOSS CEN H GPH 0.65X45°
– PUMP PRESSURE (bar): 11
- PRESSIONE POMPA (bar): 12
– AIR SHUTTER (N°NOTCHES): 5.2
- SERRANDA ARIA (N°TACCHE): 6
– HEAD ADJUSTMENT (N°NOTCHES): 10
- REGOLAZIONE TESTA (N°TACCHE): 10
Screw for the air-shutter adjustment
1
Luck-nut for the air-shutter adjustment
2
LEGENDA
Suction
3
1) Vite regolazione serranda aria
2) Ghiera regolazione testa
3) Aspirazione
SIME FUEL 25 LN (vers.HE) - SIME FUEL 35 LN (vers.HE) - SIME FUEL 25 LN (vers.std) - SIME FUEL 35 LN (vers.std)
AVVIAMENTO E REGOLAZIONE
.HE) COD. 8099124
VERS
.HE) COD. 8099125
VERS
.
) COD. 8099172
VERS
STD
.
) COD. 8099173
VERS
STD
Fig. 7
Tarature indicative
4) Ritorno
5) Regolazione pressione
6) Manometro
Return
4
Pressure calibration
5
Pressure gauge
6
070061_14_A_it
Fig. 7 Advisable calibrations
7
17
Publicidad
