SKF TLGU 10 Instrucciones De Uso página 6

UK Declaration of Conformity
TLGU 10
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare
under our sole responsibility that the products
described in these instructions for use, are in
accordance with the conditions of the following
Directive(s):
Electromagnetic Compatibility Regulations 2016
(2016 No. 1091)
The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2012 (2012 No. 3032) and the
harmonized standard: EN IEC 63000:2018:
Technical documentation for the assessment of
electrical and electronic products with respect to
the restriction of hazardous substances and are in
conformity with the following standards:
EN 61326-1:2013:
Electrical equipment for measurement, control
and laboratory use - EMC requirements -
Part 1: General requirements.
EN 55011: 2016 + A1:2017:
Industrial, scientific and medical (ISM) radio-
frequency equipment - Electromagnetic
disturbance characteristics - Limits and
methods of measurement.
EN 61000-4-2:2009:
Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques.
Section 2: Electrostatic discharge immunity test.
EN 61000-4-3:2006 + A1:2008 + IS1:2009
+ A2:2010:
Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques.
Section 3: Radiated, radio-frequency,
electromagnetic field immunity test.
The person authorised to compile the technical
documentation on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury,
Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, November 2021
Mrs. Andrea Gondová
Manager Quality and Compliance
4
EN