Bowers & Wilkins CDA-4D Manual De Instrucciones página 18

7.3.1 Output Information
This section displays the output selection made in
the previous Output Setup page.
7.3.2 Test Signal
The CDA-4D includes a built-in pink noise generator.
The pink noise signal can be used in conjunction
with a spectrum analyser to measure the speakers.
Volume
The Volume setting here allows you change the
volume of the pink noise. Changes applied here to
the volume settings are independent to the Output
Volume settings and will not affect those setting.
On/Off
The On/Off lets you play the test signal to the
channel chosen.
7.3.3 Import, Export & Copy Presets
(available when a User Preset is selected)
This section allows import, export or copy of presets
to or from a computer location.
All Presets
IMPORT (all presets) allows importing of all saved
presets from a computer. This is useful when
setting up multiple amplifiers.
EXPORT (all presets) allows saving all presets from
the amplifier to a computer.
Single Preset
Note: Make sure you have selected a user
preset from the dropdown before choosing an
action (import/export)
IMPORT (single preset) allows importing of the
selected presets from a computer.
EXPORT (single preset) allows saving the selected
preset from the amplifier to a computer.
Copy Presets
This allows duplicating of the selected preset.
Rename Presets
This allows changing the name of the
selected preset.
7.3.4.a DSP Settings for
Bowers & Wilkins products
Select each channel tab to modify channel settings.
Output Tab
Select output tab to make adjustment to speaker
settings for each output channel.
Speaker
This shows the product model selected for the
output channel.
Listening Mode
(available when a Bowers & Wilkins
subwoofer is selected)
Listening Mode provides equalisation options
for music or movie programme material.
Phase
(available when a Bowers & Wilkins
subwoofer or a User Preset is selected)
Phase default is set at OFF, when turn ON,
Phase will invert at 180°.
Delay
DELAY is shown in milliseconds, feet or meters.
When a number is entered in any of the three fields,
the other fields will be calculated automatically.
The minimum delay is 0.01 milliseconds, and the
maximum delay is 20 milliseconds.
Tone Control
TONE CONTROL allows fine adjustment
to the BASS and TREBLE.
18