Bowers & Wilkins CDA-4D Manual De Instrucciones página 3

CLASS 2 WIRING
Connecting speaker wires or input cables
while the amplifier is powered may cause
electrical shock and could damage the
amplifier. Unplug the power cord before making
connections.
Unit fuses may only be changed by skilled
personnel – [PH1] fuse may be in the
neutral, mains should be disconnected to
de-energize the phase conductor.
Do not over-drive the amplifier. Over-driving
the amplifier will result in distortion/clipping
and might damage the amplifier or speaker/
subwoofer. It will also void the warranty. To avoid
over-driving, please use the sound level meter in
the Product Configuration Page to adjust the input/
output signal during setup.
Diagram 1. Carton Contents
a
b
1x
c
d e
1x
1. CDA-4D Carton Contents
a. 1 x CDA-4D
b. 2 x Rack-mount ears
c. 4 x Feet
d. 1 x Power cable
e. 4 x Rack-mount ear screws (M5 x 8mm)
f. 4 x Feet screws (M4 x 6mm)
g. 2 x 5.08mm Pitch 4-way Phoenix Combicon style
d e
f
4x
M5 x 8mm
a c
b
2x
g
e
f
4x
M4 x 6mm
c
b d
4x
g
h
f
2x
3