Publicidad
Idiomas disponibles
Idiomas disponibles
4. TECHNICAL DATA
Model: DACS1640Li
Power: 40 V
No Load Chain Speed: 5000 rpm
Guide Bar Length: 14 inch (350mm)
Net weight: 5.5 kg
Sound Pressure level at the operator's position: 92.4dB(A)
Measured Sound Power level: 100.2dB(A) K=2.68dB(A)
Guaranteed Sound Power level: 103dB(A)
Vibration: 2.291m/s² K=1.5 m/s²
Battery Lithium-ion
Model number
Rated voltage
Capacity
Number of battery
Battery charger
Model number
Input
Output
Allowable charging temperature range
5. ASSEMBLY
5.1 Assemble the guide bar and saw chain
a) Wear gloves before assembly. Loosening bar adjustment locking knob （8） counterclockwise one
or two full turn .
b) The chain tensioning knob (7) must be rotated counterclockwise to its stop.
c) Bar adjustment locking knob (8) should be rotated counterclockwise to its stop.
d) Then take off the side cover. (Fig.2).
e)Place the chain in the slot of the guide bar, making sure the saw teeth are facing the correct
direction by matching the arrow on the guide bar ( Fig. 3A)
f) Place the saw chain around the sprocket (16) with teeth cutting edges facing away from the drive
sprocket along top edge of the guide bar. Meanwhile the chain tension knob (18) should be rotated
DYMA81
DYMA72E
40V d.c.
40V d.c.
90Wh
144Wh
20pcs
20pcs
DYMA83
220-240VAC,50Hz,1A
40V d.c.,2A
0-50°C
7
K=3 dB(A)
Fig.2
Publicidad
