• The appliance must be connected to a power outlet
with an earth contact.
• The appliance must be powered by means of a
residual current device with a rated residual operating
current of 30 mA or below.
• We recommend that you inspect the power cable
regularly for any sign of damage.
• When using an extension cord, it must be unwound
fully to prevent the cable from overheating.
• Always connect and disconnect the power lead when
the temperature is set to the minimum and to stop.
• To guard against electric shocks, do not immerse the
lead, connector or body of the appliance in water or
any other liquid. Do not handle with wet hands.
• Do not leave the lead hanging from a table or counter.
• Do not place the appliance and its lead on or near a
surface which is likely to become hot (cooking plate,
gas burner, oven, etc.).
• Place the appliance on a stable and dry surface,
slightly away from the edge and further than 20 cm
away from any wall and heat-sensitive element.
• Caution: Do not insert aluminium foil or any other
material or object between the plate and the frame
(ventilation zone).
• Do not obstruct the ventilation holes in the bottom
plate under the frame.
- 16 -