Technical description
Characteristics
• Stainless steel frame and cooking plate
• Food-grade certified plate
• IPX4 certified appliance (total protection against water spray)
• Edges on the 3 sides
• Removable tray for collecting cooking residues
• Single phase 230 volt power supply
• 2 heating zones regulated by 2 thermostats (adjustable from 50 to 300 °C)
• 2 heating indicators
• Power: 2 x 1600 watts, i.e. 3200 watts
This appliance complies with the CE European Directives.
Installation
Installation
It is essential to rinse your pancha plate with soapy water before using it.
Place the appliance on a flat and rigid surface. Do not use it on a heat-sensitive support.
Choose a worktop which is easy to maintain and lay the appliance at least 20 cm away from
non heat resistant walls to reduce radiation from the plate. For optimum user comfort, the
appliance must be located between 85 and 95 cm from the ground.
If this appliance is to be placed very close to a wall, partition, kitchen cabinet, decorative
borders, etc., it is recommended that these be made of a non-combustible material; If this is
not the case, they must be covered with an appropriate material, thermal insulating and non-
combustible, special attention being paid to fire prevention regulations.
Powering on
Connect the plancha to the nearest power source (see technical specifications of the
appliance). Caution! When you connect the plancha, it switches on automatically.
Extinction
Turn the control and temperature levers to zero and disconnect the appliance.
- 19 -