Mobiclinic LIBRA Manual De Instrucciones página 13

Instruction Manual Libra
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them.
3. If unintended movement or brake release occurs, turn the motorized scooter OFF as soon as it is safe.
4. Be aware that adding accessories or components, or modifying the motori- zed scooter, may make it more susceptible
to EMI.
20 volts per meter (V/m) is a generally achievable and useful immunity level against EMI (as of May 1994). The higher
the level, the greater the protection. This product has an immunity level of at least 10 V/m.
CHARGING THE BATTERIES
Batteries must be charged before using the scooter for the first time and should be charged after each day use. You
will need scooter and the battery charger.
1. Insert battery charger cord into the charger connector on the charger output. Refer to above figure for correct position
2. Plug the other end of the battery charger cable into a standard electrical outlet.
3. Turn the power on. Normally, The LED (Power) Light will turn on when electric current passes.
4. Charging starts. During charging, LED (Charge) will indicate orange light, when it turns to green light, that means
well-charged.
5. LED indication
- LED(POWER) - GREEN LIGHT ON: Power On.
- LED(CHARGE) - ORANGE LIGHT ON: Charging / GREEN LIGHT ON: Fully Charged
6.Charger Trouble Shooting
(A) If LED (POWER) light is off.
- Check the input voltage (115V/230V) is the same as you adjust.
- If light is still off, please check and repair the battery charger.
(B) If LED (CHARGE) light is off.
- Check to see clips connection is correct.
- If the battery is fully charged, the LED (CHARGE) light will be off.
- If light is still off, the battery may be defective.
(C) If ORANGE light can turn to GREEN.
- The battery can not be charged. Please check and recover it.
(D) If ORANGE light turns to GREEN immediately
- Check to see the battery is fully charged, if not, The battery may be defective Check and recover it.
Batteries must be fully charged in order to not hurt their lifetime. If not, faults may result
DISASSEMBLING YOUR SCOOTER
NO TOOLS ARE NECESSARY. YOU CAN DISASSEMBLE SCOOTER FOR TRANSPORT
1. Remove seat by releasing Seat Rotation Lever (A) and then lift off. Gently lift rear storage cover (B).
ES EN FR IT DE PT NL SWE PL DK
13