Publicidad
Idiomas disponibles
Idiomas disponibles
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns or a
fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f)
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Grass trimmer safety warnings
a) Do not use the machine in bad weather
conditions, especially when there is a risk
of lightning. This decreases the risk of being
struck by lightning.
b) Thoroughly inspect the area for wildlife where
the machine is to be used. Wildlife may be
injured by the machine during operation.
c) Thoroughly inspect the area where the
machine is to be used and remove all stones,
sticks, wires, bones, and other foreign
objects. Thrown objects can cause personal
injury.
d) Before using the machine, always visually
inspect to see that the cutter or blade and the
cutter or blade assembly are not damaged.
Damaged parts increase the risk of injury.
e) Follow instructions for changing accessories.
Improperly tightened blade securing nuts or
bolts may either damage the blade or result in it
becoming detached.
f)
The rated rotational speed of the blade must
be at least equal to the maximum rotational
speed marked on the machine. Blades running
faster than their rated rotational speed can break
and fly apart.
g) Wear eye, ear, head and hand protection.
Adequate protective equipment will
reducepersonal injury by flying debris or
accidental contact with the cutting line or blade.
h) While operating the machine, always wear
safety footwear. Do not operate the machine
when barefoot or wearing open sandals. This
reduces the chance of injury to the feet from
contact with a moving cutter, line or blade.
i)
While operating the machine, always wear
long trousers. Exposed skin increases the
likelihood of injury from thrown objects.
j)
Keep bystanders away while operating the
machine. Thrown debris can result in serious
personal injury.
k) Always use two hands when operating the
machine. Holding the machine with both hands
will avoid loss of control.
l)
Hold the machine by the insulated gripping
surfaces only, because the cutting line or
blade may contact hidden wiring. Cutting line
or blades contacting a "live" wire may make
exposed metal parts of the machine "live" and
could give the operator an electric shock.
m) Always keep proper footing and operate the
machine only when standing on the ground.
Slippery or unstable surfaces may cause a loss
of balance or control of the machine.
n) Do not operate the machine on excessively
steep slopes. This reduces the risk of loss of
control, slipping and falling which may result in
personal injury.
o) When working on slopes, always be sure of
your footing, always work across the face
of slopes, never up or down and exercise
extreme caution when changing direction.
This reduces the risk of loss of control, slipping
and falling which may result in personal injury.
9
EN
Publicidad
