TensCare FORM Instrucciones De Uso página 9

be indicated on the display after 5 seconds.
Note each session is 20 minutes long. The
stimulator will automatically switch off at
the end of the session.
Lock / Unlock
To prevent accidental changes of intensity,
the stimulator can be locked. Double press
the control button to lock and unlock the
stimulator. This will be indicated on the
display by two flashes.
Check Battery Level
Triple press the control button to display the
battery level. Battery level will be shown for
5 seconds before returning to the session
treatment time.
Preparing For a Session
For best results, a Form muscle recovery
session should be completed within two
hours of finishing physical exercise.
Select the correct smart electrode for the
targeted muscle (see electrode placement
guide).
Wipe clean and dry the targeted area of
the body.
Remove the hydrogels from their foil bag.
1
1. Remove the black liner labelled 1 from one
of the hydrogels.
2. Apply to the rear of the electrodes.
3. Remove the clear liner labelled 2 from
the electrodes. Be careful to ensure the
hydrogels remain stuck to the electrode.
Note: It is important the liners are
removed in this order. Ensure to keep
one of the liners to re-apply onto the gel
once your session is complete.
3
4. Place the electrode on the selected
muscle (see electrode placement guide).
Connect the stimulator to the electrode pad
via the magnetic fixing point.
2
4
9