Publicidad
Idiomas disponibles
Idiomas disponibles
5. Appointment "ON": In standby mode, press
appointment turn-on time in 1-12 hours. After complete setting, the display shows the
appointment turn-on time and also the light "
decreases 1 hour for each hour passed. When the appointment power-on time arrived, the
product will automatically turns on. The default setting temperature is 23 ℃ during
appointment turn-on. Below photos is an example to set appointment turn-on time to 8
hours:
Note: If not setting the temperature and weekly program, the product will automatically
turn-off after 12 hours of continuous work, and enter into standby.
Function operation (ONLY by remote control)
1. Press "
", the product enter into working status. See below :A
2. 2.Press "
" button for one time, the product works with low heating and display
shows"-- /
" See below :B. Press again, changes to high heating and display
shows"--/
A
3.The timer
of remote control operate as same as the timer button on unit body.
".See below :C
B
timer button, you can set the
" is on. The display automatically
C
Publicidad
