Publicidad
Idiomas disponibles
Idiomas disponibles
5).Press"
",the display shows 00"as default. Press"
turn-on time. Such as set the turn-on time 7:00am P1:See below :D (Memo: the setting time
0-24 for choice)
6).Press"
",the display shows the previous step turn-on time by default. Press
"
" continuously to set the turn-off time. Such as set the shutdown time at 13:00pm:
(Note: turn-off time later than turn-on time, when turn-on time same as turn-off time, the
unit in stand by mode)See below :E
7).Press"
/
"to setting the target temperature(Temperature range 10-49℃);
8). Repeat steps 3-7 above, you can set the whole weekly program. Then press"
confirmed;
9). To cancel the weekly function, press the "
program is off. The product will revert to the previous function working status.
Note:
-After the above setting are completed and P program is working,press"
"to check the setting time of each day and time periods,
-Press"
/
",set working temperature under different time periods.
- The turn-on time periods 0~24hours, cannot set to minutes;
-The"TIME/OFF"can not be less than"TIME/ON";
-When the"TIME/ON" is the same as"TIME/OFF", the time period enter into standby
mode;
A
Set open-window detection(ONLY by remote control)：
1). Press"
"，the product enter into working status. Heating for a moment untill stable.
2). Press"
" by remote control,light "
B
C
" continuously to set the
" agian , the light "P" will go off. The weekly
D
/ ℃ " will on; The temperature
"to
/
/
/
E
Publicidad
