Publicidad
T EC HN IC A L I N F ORMAT IO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate - 16555XX1
handshower
spout @ 44 PSI
Flow rate - 16550XX1
handshower
spout @ 44 PSI
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
This trim is for use with rough valve
13444181 (not included). The mounting
surface must be finished and made watertight
before installation of this trim kit.
⁄ This unit is not anti-scald. In Massachusetts, or if re-
quired by local plumbing code, install an approved
remote pressure balance valve or other approved
anti-scald device.
⁄ Protection against backflow is provided by a check
valve in the handshower hose and by an automati-
cally resetting diverter.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
1.8 GPM (6.8 L/min) max.
6.6 GPM (25 L/min)
2.0 GPM (7.6 L/min) max.
6.6 GPM (25 L/min)
E N G L I S H
⁄ 16555XX1 ONLY: This handshower is for use with
automatic compensating valves rated at 1.4 GPM
(5.3 L/min) or less.
⁄ 16550XX1 ONLY: This handshower is for use with
automatic compensating valves rated at 1.5 GPM
(5.7 L/min) or less.
⁄ To prevent scald injury, the maximum output tempera-
ture of the shower mixing valve must be no higher
than 120°F (49°C). In Massachusetts, the maximum
output temperature can be no higher than 112°F
(44°C).
⁄ Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a
safe place. The receipt is required should it be neces-
sary to request warranty parts.
Publicidad
