MOB MO8839 Manual Del Usuario página 2

MO8839
EN
Flat Powerbank

Charging electronic digital equipment:
Please use the original cable of your electronic digital products for connection. The power bank will automatically
charge your electronic digital products once they are connected to each other. (Please make sure the power bank is
charged for best performance.) Unplug the charging cable after the digital product is fully charged.

Caution: The output power of the power bank is 5V/1A and 5V/2.1A, please check input
specification of your product before charging with the power bank.

Check battery capacity in power bank:
Press the button to check if the power bank needs to be recharged. The Blue LED lights indicate the battery capacity
remaining in the power bank as follows – 4 lights = 100%; 3 lights = 75%; 2 lights = 50%; 1 light = 25%

Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB cable in to the power bank to recharge. The blue
indicator light will flash when charging is in progress. The indicator lights turns into full light when the power bank is
fully charged.

LED Torch:
Press and hold the button 2 times to switch ON/OFF the torch.
Specification:
Input: DC5V/1A
Output: 5V/1A and 5V/2.1A
Capacity: 8000mAh
Power efficiency: 70%
Charging time: 7-9 hours approximately
Cycle life: 500 times
Protection voltage: 5.5V

When connecting the power bank to the device, please use charging cables and connectors provided by an
authorized maker. The use of charging cables or connectors from unauthorized makers may cause severe or fatal
injuries and property loss and damage to the product and the device.

Power Bank is compatible with Apple® Product USB Cable/ adapter (Not Included).
If the product does not start charging when it connects to the device, please disconnect all cables and try again.

Battery explodes if disposed in fire

Dry location use only

Shock hazard – Do not open