Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING
THE CONTROLS
Temperature
• Your refrigerator
has a control
pad above the
refrigerator
compartment
that lets you regulate
the
temperature
in the freezer
and refrigerator
compartments.
• Initially set the refrigerator
control at 37°F (3°C) and
the freezer
control at 0°F (-18°C).
Leave it at these
settings
for 24 hours (one day) to stabilize.
Adjust
the compartment
temperature
as desired.
• Refrigerator
Temp Control:
33°F to 46°F
(0°C to 8°C) The lower the number
setting, the
colder the refrigerator
compartment
will become.
• Freezer
Temp Control:
-6°F to 8°F
(-21°C to-13°C)
The lower the number
setting, the
colder the freezer
compartment
will become.
Ultra Ice
• When you press the Ultra Ice button, the graphic
[ _;_;:_- ] will light up in the display and it continues
for 24 hours. It will automatically
shut off after 24
hours have passed. You can stop this function
manually
by pressing the button one more time.
• This function
increases
both icemaking
and
freezing
capabilities.
Door Alarm
• When power is connected
to the refrigerator,
the door alarm is initially set to - -;;o';'-
Alarm
i}
ON
and
the door alarm display will show the
A%o_II (ON).
• When either the refrigerator
or the freezer door is
left open for more than 60 seconds,
the alarm will
sound to let you know the door is open.
• When you close the door, the door alarm will stop.
• If you want to disable
the door alarm function,
press the I ,%';;, l b utton and the door alarm display
will switch to
A,o,m°°°'
(OFF).
_, CAUTION
Demo Mode (Retail Stores)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve energy while on
display in a retail store.
1. To Activate:
With the refrigerator door opened, press and hold the
Refrigerator
Temp and Ultra Ice buttons at the same
time for 5 seconds. The control panel will beep to
confirm that the Demo Mode is activated.
2. To Deactivate:
With the refrigerator door opened, press and hold the
Refrigerator
Temp and Ultra Ice buttons at the same
time for 5 seconds. The control panel will beep to
confirm the Demo Mode is deactivated.
AIRFLOW
In order to ensure
proper temperatures,
air must flow
between
the refrigerator
and freezer
sections.
The
arrows in the figure indicates
air vent locations
and
the direction
of airflow.
Do not block
any of the cool air vents
with food
packages.
If the vents are blocked,
airflow will be
interrupted.
This may result in temperature
and
moisture
problems.
If you add a large amount of food, the refrigerator
will
take longer to cool it.
At initial start-up
allow your refrigerator
to run for 2 or
3 hours before
placing food in it.
18
Publicidad
Capítulos
Tabla de contenido
