Adjusting Control Settings - Sears Kenmore 795.7160 Serie Manual De Uso Y Cuidado

Articulating IVlullion
This feature is a metal strip attached to the left door
that articulates (rotates) 90 degrees as the door is
closed, forming a mullion (base) for the left and right
door gaskets to seal against.
Caution When Closing the Door
_k CAUTION
To reduce the risk of scratching the door or
breaking the door mullion, please make sure that
the refrigerator door mullion is always folded in.
CONDITION/ RECOMMENDED
REASON: ADJUSTMENT:
REFRIGERATOR section
too warm
- Door opened often
- Large amount of food added
- Room temperature very
warm
Adjust the
REFRIGERATOR
temperature to a colder
setting.
Note: When changing
temperature settings,
make adjustments one
increment at a time and
wait 24 hours between
adjustments.
m FREEZER section too
warm/ice not made fast
enough
- Door opened often
- Large amount of food added
- Very cold (below 55 °F)
room temperature
(Compressor does not cycle
often enough)
- Heavy ice usage
- Air vents blocked by items
Adjust the FREEZER
temperature to a colder
setting.
Note: When changing
temperature settings,
make adjustments one
increment at a time and
wait 24 hours between
adjustments.
Move items out of
airstream
ADJUSTING CONTROL SETTINGS
It is best to wait for 24 hours for the refrigerator to
cool down completely before making any
adjustments to the temperature settings. The initial
settings mentioned in SETTING THE CONTROLS
section should be correct for normal household
refrigerator use. The controls are set correctly when
milk or juice is as cold as you like and when ice
cream is firm.
The refrigerator control functions as the thermostat
for the entire appliance (refrigerator and freezer
sections). The colder the setting, the longer the
compressor will run to keep the temperature colder.
The freezer control adjusts the cold air flow from the
freezer to the refrigerator. Setting the freezer control
to a lower temperature keeps more cold air in the
freezer compartment to make it colder.
If you need to adjust temperatures in the refrigerator
or freezer, start by adjusting the refrigerator and
allow 24 hours for the temperatures to stabilize.
If it is still too warm or too cold, adjust the freezer
control.
Always remember to wait at least 24 hours
between adjustments.
m REFRIGERATOR section
too cold
- Controls not set correctly for
your conditions
Adjust the
REFRIGERATOR
temperature to a warmer
setting.
Note: When changing
temperature settings,
make adjustments one
increment at a time and
wait 24 hours between
adjustments.
m FREEZER section too cold
- Controls not set correctly for
your conditions
Adjust the FREEZER
temperature to a warmer
setting.
Note: When changing
temperature settings,
make adjustments one
increment at a time and
wait 24 hours between
adjustments.
19