Light Bulb Replacement; Power Interruptions; When You Go On Vacation; When You Move - Sears Kenmore 795.7160 Serie Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LIGHT BULB REPLACEMENT
Electrical Shock Hazard
Before
replacing
a burned-out
light bulb, either
unplug the refrigerator
or turn off power at the
circuit breaker
or fuse box.
POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep
all refrigerator
doors closed to help foods stay
cold and frozen.
2. If the power will be out for more than 24 hours,
remove all the frozen food and store it in a frozen
food locker.
NOTE: The refrigerator
compartment
has LED
interior lighting
and service
should only be performed
by a qualified
technician.
Change
Freezer
Compartment
Light Bulb
1. Unplug
refrigerator
power cord from outlet.
2. Remove
the screw using a Phillips screwdriver.
3. Grasp the light cover, pull the cover downward.
Jl, CAUTION:
Make sure the bulb is cool to the
touch.
4. Rotate the bulb counterclockwise
to remove.
5. Replace
with a new 60-watt
appliance
bulb.
6. Insert tabs on back of cover into slots in freezer
ceiling.
Push cover up to snap front into place.
7. Tighten
the screw using a Phillips
screwdriver.
I
/
• When you are finished,
reconnect
the refrigerator
to
the electrical
source.
WHEN
YOU
GO ON VACATION
If you choose
to leave the refrigerator
on while
you are away, follow these steps to prepare your
refrigerator
before you leave.
1. Use up any perishables
and freeze other items.
2. Turn off icemaker
and empty the ice bin.
If you choose
to turn the refrigerator
off before
you leave, follow these steps.
1. Remove
all food from the refrigerator.
2. Unplug the refrigerator.
3. Clean refrigerator,
wipe it and dry well.
4. Tape rubber or wood blocks to the tops of both
doors to prop them open far enough
for air to get
in. This stops odor and mold from building
up.
WHEN YOU MOVE
When you are moving your refrigerator
to a new
home, follow these steps to prepare
it for the move.
1. Remove
all food from the refrigerator
and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable
parts, wrap them well and
tape them together
so they do not shift and rattle
during the move. Refer to sections
in Using
your
Refrigerator
for removable
instructions.
5. Screw in the leveling
legs all the way so they do
not scrape the floor. See the Door
Closing
section.
6. Tape the doors shut and tape the power cord to
the refrigerator
cabinet.
When you get to your new home, put everything
back and refer to the Installing
Your Refrigerator
section for preparation
instructions.
26

Publicidad

Tabla de contenido
loading

Tabla de contenido