Publicidad
Note:
Please ensure that all gaskets are closed to ensure water and dust tightness.
8.2. Activate Esim
You can activate the eSIM in several ways:
1. Via the Android Setup Wizard during initial device setup:
Scan the eSIM QR code that you have received from your service provider or manually
enter the eID that you have received from your service provider.
2. Via the settings menu of the smartphone:
> Settings > Network & Internet > Mobile network (add Network) > Download SIM > scan
(or manually enter) eSIM QR code that you have received from your service provider.
8.3 Insatll and disassemble the Waist clip
As is shown
8.4. 16pin interface
Loosen the screw on the 16pin interface cover using the screwdriver provided. Remove
the cover as shown ;
Connect the plug of the 16pin accessory to the 16 interface as shown ;
Hand-tighten the screws using the Screwdriver ;
Check that the plug is seated correctly and securely.
6
Nano-SIM
Micro SD
Publicidad
