Publicidad
9.2. Multifunctional Alarm (LWP)
The multifunctional alarm is the feature that detects the status of the mobile phone status
during motion and rest and automatically notifies the emergency contact via phone call/
SMS.
1. Default password: 1122.
2. After opening the application for the first time, a default phone number is requireed to
be set for the alarm.
3. If the mobile phone uses two SIM cards, a default phone number is required to be set
for calling/SMS.
4. Any aborted operation will cause the application process to be interrupted and it needs
to [close/open] the application again in order to reset the alarm process.
5. The alarm will not be triggered when the mobile phone is connected to a USB charger.
10. RECYCLING
The crossed-out wheelie-bin symbol on the product, battery, literature, or packaging is
a reminder that all electrical and electronic products, batteries, and accumulators must
be taken to separate collection points at the end of their working life. This requirement
applies in the European Union. Do not dispose of these products as unsorted municipal
waste. Always return used electronic products, batteries, and packaging materials to
dedicated collection points. This helps prevent uncontrolled waste disposal and promotes
the recycling of materials. More detailed information is available from the product
retailer, local waste authorities, national producer responsibility organisations, or
your local Power Idea Technology (Shenzhen) Co., Ltd. representative.
11. INFORMATION CONCERNING CE SAR CERTIFICATION
(SPECIFIC ABSORBATION RATE)
The SAR limit of Europe is 2.0W/kg for the head and Body, 4.0W/kg for the limbs.The
device has been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is 1.27W/kg and when correctly
worn on the body is 1.23W/kg , limbs is 2.3W/kg. This device was tested for typical body
worn operations with the back of the handset kept 5mm from the body. The device
complies with RF specifications when used at 5mm from the body. Belt clips, holsters and
similar accessories used should not contain metallic components in the assembly. The use
of accessories that do not satisfy these requirements may not comply with RF exposure
requirements,and should be avoided.
12. TRADEMARKS
All other trademarks and copyrights are the properties of their respective owners.
13. WARRANTY
You can find the warranty conditions at https://www.ruggear.com/support.html
8
Publicidad
