Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Shelves
1.
Open the door completely.
2.
Line up the shelf notches with the rail posts on both the right and left sides.
3.
Push the shelf down and then push it all the way inwards until the shelf fully
rests inside of the unit and you are able to close the door.
4.
The shelf should glide smoothly back and forth. If it does not, you may need to
remove it and start over.
Removing the Shelves
1.
Open the door completely.
2.
Remove all of the contents loaded on the shelf, if applicable.
3.
Line up the shelf notches with the rail posts as indicated below. This will
require you to hold on to both rails as you move the shelf to line up the posts
with the notches on both sides of the shelf.
4.
Evenly lift the shelf up and then pull the shelf out.
EN
31
Publicidad
