Climit GG E 3 Manual Del Usuario página 39

KEY
L Line
N Neutral
IG Main switch
TS Safety stat
TC Boiler stat
SA Green voltage LED
P C.H. pump
B Direct Feeding Burner (not supplied)
B1 Permanent Feeding Burner (not supplied)
TA Room stat
OP Programmer's clock (optional)
NO TE: When a room stat is to be fitted remove the link
between terminal 4 and 5 on the connector plug.
To connect the programmer's clock (OP), remove the link
between terminals 5 and 8.
NOTE: The brown (capped off)
cable has to be exclusively
used in case of permanent
feeding burners (type B1).
Fig. 6
27