Publicidad
Idiomas disponibles
Idiomas disponibles
3. Drill 2.5 mm diameter holes at the
point marked, and install the ampli-
fier, either on the carpet or directly
to the chassis.
Tapping-screws
(4 × 18 mm)
Drill a 2.5 mm diameter hole
All manuals and user guides at all-guides.com
Floor mat
or chassis
Fitting the end cap
1. Align the main unit and end cap
holes, and insert the screw.
Screw
2. Tighten the screw with a 4 mm
hexagonal wrench (not supplied).
Hexagonal wrench
Endcap
12
Publicidad
