Publicidad
Maintenance
Claning and Care
• To guarantee adequate motor cooling, always keep slots
clean and free of obstructions.
• Regularly inspect all the assembly screws. Double-check
they are properly tighten. If any screw is loose screw it
immediately.
Service
• Service should only be made in a
Authorized Service Center. Service and maintenance
performed by non-qualified people may be dangerous and
can lead to personal injuries. It also makes the product
Warranty void.
Lubrication
• We recommend lubricating the tool transmission every
carbon brush change in a
Service Center.
Carbon Brush Replacement
• The carbon brush wear indicator LED will be lit when the
carbon brushes are worn out in excess or show excessive
sparking go to a
Center .
• Carbon brushes shall be checked periodically and replaced
always in a
• When replaced, ask the technician to inspect if the new
carbon brushes move freely in the carbon brush housing. Ask
to turn on the tool during five minutes to make the contact in
the carbon brushes and the commuter even.
• Use only original
brushes, designed specifically with the right strength and
electric resistance for each type of motor. Carbon brushes
with different specifications may damage the motor.
• When replacing carbon brushes, always change both.
Authorized
Authorized Service
Authorized Service Center.
spare carbon
9
ENGLISH
Publicidad
