16. The hose should be regular checking for your safety, replace it if necessary.
17. The guard on the appliance is to prevent risk of fire or injury from burns and no part of it should
be permanently removed. It does not give full protection for young children or the inform.
WARNING
Perform a leak test on all connections every time you reconnect the cylinder, or if the
heater has not used for a significant period.
Don't twist the flexible tube or the hose.
Don't move the appliance when operating, shocks and bumps may activate the safety
device.
FAULT FINDLING CHART:
SYMPTOMS
1.Pilot
will
not
automatically
2.Pilot
will
not
automatically but points(a) to
(e) are satisfactory and the pilot
will light with a match
6.Smell of combustion
REPAIRS TO BE CONDUCTED BY AUTHORSED
FAULT
light
No spark across electrode gap
light
Incorrect position of spark in
relation to pilot gas flow.
Missing
piece
fireclay.
(a)Ensure
switch is functioning correctly.
(b)Check that electrical lead is
not damaged.
Re-position spark plug so that
spark jumps across gas flow.
of
ceramic
Inspect
plaque and locate place where
some
displaced.
Repair
leave to sot for approx.24
hours.
25
REMEDY
that
piezo-electric
perimeter
of
each
fireclay
has
been
with
PYRUMA
and