JVC KD-X352BT Manual De Instrucciones página 20

BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's
operations from the iPhone/iPod (via Bluetooth or via USB input terminal)
or Android smartphone (via Bluetooth).
Preparation:
Install the latest version of JVC Remote application on your device before
connecting. For more information, visit <http://www.jvc.net/cs/car/>.
1
Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
REMOTE APP
SELECT Select the device (IOS or ANDROID) to use the application.
IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected
via USB input terminal. ; NO: Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is
connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via
the USB input terminal.
– You change from iPod USB source to iPod BT source.
ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ;
NO: Cancels.
ANDROID
Selects the Android smartphone to use from the list.
LIST *
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
16
ENGLISH
STATUS
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press
• You can operate the iPod/iPhone in the same way as iPod/iPhone via
.
USB input terminal. ( 7)
• If you plug in an iPhone/iPod to the USB input terminal while listening
Default: XX
to iPod BT source, the source automatically change to iPod USB. Press
Shows the status of the selected device.
IOS CONNECTED: You are able to use the application using the iPhone/
iPod connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED: No IOS device is connected to use the application.
ANDROID CONNECTED: You are able to use the application using the
Android smartphone connected via Bluetooth.
ANDROID NOT CONNECTED: No Android device is connected to use the
application.
repeatedly to select iPod BT.
to select iPod BT if the device is still connected via Bluetooth.