Elimination; Marked Regulatory; Technical Features; Ec Declaration Of Conformity - stayer TM10BA Manual De Instrucciones

The warranty is limited only to manufacturing defects or
machining and ceases when the parts have been remo-
ved, tampered with or repaired outside the factory.

5.4 Elimination

We recommend that the power tools, accessories and
packaging should be a recovery process that respects the
environment.
Only for EU countries:
Do not dispose of power tools into household waste!
According to the European Directive 2002/96/
EC on Waste Electrical and Electronic
Equipment and its implementation into national
law, must accumulate power tools separately
to be submitted to an ecological recycling.
Subject to modification.

6. Marked regulatory

6.1 Technical Features

= Power input.
= Idling speed.
= Drilling steel capacity.
= Drilling wood capacity.
= Protection class.
= Weight.
L = Sound power level.
WA
L = Sound pressure level.
PA
= Vibration.
These data are valid for nominal voltages [ U] of 230/240
V ~ 50/60 Hz - 110/120 V ~ 60 Hz values can vary lower
voltage , and the models for specific countries. Please
observe the article number on the nameplate of the device,
as the trade names of the individual machines may vary.
Information about noise and vibration
Noise determined according to EN 60745.
The typical level of sound pressure apparatus , determined
with a filter A, amounts to: Sound pressure level 88 dB (A);
sound power level 99 dB (A). Tolerance K = 3 dB.
Wear hearing protection !
ENGLISH
14
Total vibration values ( vector sum ) determined according
to EN 60745: Sanding drywall ah = 4 m/s
The vibration emission level given in this information
sheet has been determined by the measurement
procedure specified in EN 60745 and may serve as a
basis for comparison with other power tools. It is also
suitable for provisionally assess the stress experienced
by the vibrations. The vibration emission level has
been determined for the main applications of the tool .
Therefore, the vibration level may be different if the tool
is used for different applications, with different votes , or if
the maintenance of it was lacking. This may significantly
increase the exposure level over the total working period .
To accurately determine the stress experienced by the
vibration should also consider those times when the tool
is switched off or when it is running but not actually doing.
This may significantly decrease the exposure level over the
total working period. Attach additional security measures
to protect the wearer from the effects of vibration such as
: maintenance of power tools and accessories, keep the
hands warm, organization of work patterns.

6.2 EC Declaration of Conformity

The undersigned: STAYER IBERIAN, Inc.
Internet address:
Calle Sierra de Cazorla 7
Area Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Phone:+34 91 691 86 30 / Fax: +34 91 691 86 31
CERTIFIED
The machine:
Type: ELECTRIC SCREWDRIVER.
Model: TM10BA - TM10CA - TM10DA
Declare under our responsibility that the product described
under "Technical Data" is in accordance with the following
standards or standardization documents:
EN 60745-1, EN 60745-2, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN61000-3-3 according to 2006/42/EC,
2014/30/EU.
Ramiro de la fuente
Director Manager
14
, K = 1.5 m/s .
2 2
January, 2017